Review: Picade Mini Retro-Gaming Cabinet

Simon Hill

7/10

Playing games from your childhood can be a lot of fun. Muscle memory often kicks in with old classics you spent days beating, even if it was decades ago. Sliding back into that groove can almost feel like coming home. Little wonder, then, that retro gaming has never been more popular. You can buy an assortment of great retro gaming consoles, each with their own temptations and downsides, or you could build your own.

The Picade is a mini arcade cabinet kit. It includes all the hardware you need, packed into organized boxes with clear instructions for assembly. Add a Raspberry Pi, a USB-C power supply, and a microSD card with the RetroPie operating system, and you are ready to game. Set everything up correctly, and you can play games on emulators for just about any retro system you can think of (Atari, Nintendo, Sega, NeoGeo, Amiga, Amstrad, ZX Spectrum--the list goes on), though you must supply the game ROMs yourself for legal reasons.

The Picade comes in two sizes with an 8-inch or 10-inch screen (I built the 10-inch version). You could probably put the Picade together in less than two hours if you follow the instructions carefully and work with confidence. It's suitable for beginners who fancy building their own computers, and if you've ever upgraded RAM or fitted a new hard drive, there's nothing here that will faze you. But it is fiddly, and you need a nice clean work surface with plenty of space.

As an impatient idiot, it took me more than three hours, but that's because I did not read the instructions properly and forgot to remove some of the protective film on the acrylic for the screen, which meant I had to disassemble it. I then had to disassemble it again because there was a trapped hair between the acrylic and screen driving me crazy; the screen assembly is the most challenging bit. Connecting everything is fiddly and takes a steady hand. There are a few steps where the video guide comes in handy.

Your reward is a sturdy wee desktop arcade cabinet that looks great. You get artwork and stickers in the box, but you can always design and add your own (it's easy to switch the cardboard cutouts to go under the acrylic panels). The 10-inch IPS display has a resolution of 1024 x 768 pixels, the speaker is impressively loud, and you get a proper arcade-style joystick with six buttons.

A keyboard is essential for the initial setup. I connected the Picade to my Wi-Fi network and used the web interface to drag and drop ROMs from my PC, but you could load them onto the microSD card or use a USB flash drive. There are various ways to find ROMs for RetroPie, but exercise caution, as playing licensed games you have not purchased is illegal.

The Picade is a great way to play arcade games and titles from older consoles. The full-size joystick and buttons feel responsive and durable. Classic arcade controls are much less taxing on your fingers and hands than controllers can be, especially the cheap controllers that ship with many retro consoles. All that's missing is a volume knob (I found it annoying having to dip into the menu to change the volume).

I had a blast with Galaga and Ikaruga, played some Shadowrun and Super Bomberman, and fired up Ghouls 'n Ghosts (an old favorite of mine). Before long, the bleeps and bloops lured my kids away from the Xbox, and they tried a few classic games. Ms. Pac-Man proved most popular. It's easy to configure the controls in RetroPie, but they don't work with every emulator, so be prepared to occasionally dig into settings and work out how to map them.

Since the Picade has a Raspberry Pi inside, you can tinker with the software as much as you like. The recommended RetroPie OS is a kind of amalgamation of projects like Emulation Station and RetroArch. There's a lively community of retro gamers, and you can find tons of themes and scripts that folks have put together. There is a learning curve, so expect to spend some time tweaking, but you can usually find answers in the forum.

While the Picade is a fun build, the kit with the 10-inch display is $250 (GBP250), the 8-inch version is $195 (GBP195), and you must buy a Raspberry Pi (the Raspberry Pi 4 Model B with 1 GB of RAM is $40), a USB-C power supply ($9), and a microSD Card. It's easy to install the OS on your own card if you have one, but Pimoroni offers a preloaded 32-GB card for $10. Add it all up, and it's an expensive project to play vintage games.

You can always build your own Raspberry Pi retro gaming system to suit your budget and hook it up to your TV. RetroPie is a great way to play a library of games across systems without multiple retro consoles. After all, most of us have limited space under the TV.

Folks who lack the time, patience, or desire to build a system and fiddle with software to work out the kinks will be better served by one of the other retro consoles we recommend. But Picade is a good project for beginners and could even be a fun family activity to try with older kids. I had a blast building this machine and watching my kids grapple with old-school games. If you enjoy tinkering and have a passion for retro gaming, you will enjoy this tiny arcade cabinet.